Double Glazed Window Repair
Double glazing is an energy efficient investment that prevents loss of heat in winter and helps to keep your home cool in the summer. Repairing your double-glazed windows when needed is a great way to keep them in good condition.
Over time, condensation and misting can be detrimental to your double-glazed windows. double glazing Enfield glazed windows may be difficult to open and close.
Broken Panes
A ball that is rogue or a stone flying from your lawnmower or even a storm that is strong enough can break your double pane windows, leaving you home vulnerable to the elements. While a damaged window may be difficult to repair but you don't need to replace it entirely. In fact, the insulated glass between the two panes is in good shape and you can fix your double-pane windows with some DIY effort.
To begin, you'll need remove the broken glass from the frame. Be careful to avoid any glass shards falling to the floor or falling out of the frame. Wear gloves for your hands and use a rag around the broken glass to avoid further cuts or damage. After taking out the broken glass, clean the frame of the window thoroughly, removing any sealant or debris. Sand rough areas of the window frame to create a smooth and even surface to put in your new glass.
After cleaning the frame after cleaning, you can apply a second layer of glass to the seam where you removed the broken pane. This is the most effective method to seal and protect your window. It will also reduce your energy bills by preventing water and drafts from entering the home. The next step is to choose your glazing material. There are many options available, including clear tape that is more durable than regular tape and helps prevent further cracking of your window or glazing film which is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match your existing frame and will keep snow and rain out as well.
Whatever the material you pick regardless of the material you select, it is crucial to press glazier's facets into the place where the putty joins the frame. These will hold the glass in place, and aid in adhering to the frame. Hardware stores carry glazier's point ropes, which can be rolled out on the frame rabbets.
Condensation
Double glazing can be prone to condensation issues and if you experience this issue, it is recommended to contact the company that provided the window. Many companies offer warranties and guarantees that cover the issues. Condensation and fogging between panes of glass is an obvious indication that the seals between your windows have been damaged and can only be fixed by a professional who will repair both panes.
It's a difficult process that requires special tools to remove and replace the window. A professional can complete this job and provide the tools. Utilizing these tools could be dangerous, however, so it is always recommended to leave this kind of job to a professional.
Wear safety gloves and glasses if you decide to do it yourself. You could be exposed to glass fragments flying around. It is crucial to remove all metal or putty points from the grooves that will hold the new window. It is also recommended to brush the frame with wire and vacuum or wipe it with a damp cloth. After the frame is dry it is time to order an additional piece of glass that is 1/8" shorter in both directions than the existing window. Test-fit the glass into the grooves.
You will have to apply a layer of silicone caulk in the grooves of your frames to ensure your new glass is properly installed. Once the caulk has dried it is time to smooth it and make any needed adjustments. The wood molding can be put back in place.
If the weather suddenly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause frames of double-glazed windows to expand or shrink, causing them to slide and become stuck. You can try wiping the frames with water and then lubricating them in the event that this happens, but it may be better to seek help from the company who installed your windows.
Misted
Misted Double Glazing is a problem with windows that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing consists of two panes which are separated by a space filled with argon for better thermal efficiency. This results in an airtight seal that keeps warm indoor air inside and cold outdoor air out.
The seal could fail over time, and water can accumulate between the glass panes which can cause them to turn to appear misty. This occurs because the sun's heat causes the gap between the window panes, causing the water to evaporate.
This is a normal process however, if it occurs between the window panes it could cause problems as it is no longer able to control the temperature in the room and allow the outside temperature to affect the indoor temperature. If you notice that your double glazed windows are becoming blurred, call the experts at Northfield Glass to investigate.
We can repair the individual blow-sealed unit without having to replace the whole window, which is a lot less disruptive than a total replacement. Our misty glass repair involves taking off and cleaning the glass unit, then replacing it with a brand new one. This creates a watertight seal again.
Certain companies in the business claim to inject chemicals through holes drilled into windows that have been misty to eliminate the fog and condensation. We don't suggest this method. This is not just ugly, but it can also damage the toughened glass and leave you with windows that do not fully perform its function.
It is important to fix the issue as quickly as possible, as left untreated, it could lead to mould growth that not only damages the window but also poses health risks to your family members. The moisture in the window may cause other problems in your home like damp or rot. In certain cases windows, they may have to be replaced completely.
Failed or Blown
Modern double glazed windows have two glass panes with an inert gas or air between them. This helps to improve their thermal efficiency by keeping the cold out and heat in. As time passes, the gas can become depressurised which can lead to a range of issues.
One of the most frequent is condensation that forms between the panes. While it is a natural event, it doesn't necessarily mean that your window has failed, it can be an indication that you need to seal your windows. Condensation can also be an indication of broken double glazing, which could require a re-installation.
Double-glazed windows may also cause drafts. This could be caused by a failure of the seal or a damaged handle or lock. A draught is evident and can result in higher heating costs Therefore, it is essential to fix it sooner rather than later. You can test the seals by placing your finger around the edges of the window frame to see if you feel any cold air.
You may also see water beads on the interior of windows when your window seals aren't working. This is a sign that you need to re-seal your double glazed windows.
Your window frames are designed to move a bit in order to keep the glass sheets in their place. Over time, this special packaging material could become compacted. This could cause the seal to be broken. This will allow the air to flow between the panes, decreasing the energy efficiency of your window.
Double glazing that has broken seals is a sign of failure and needs to be repaired as soon as possible. A damaged seal can stop your double glazing from performing its primary function which is to keep cold air out and warm air in. A blown seal can also let moisture into your home, which can lead to mold and other unpleasant conditions. You should call a specialist in double glazing repair immediately if you notice a blown seal in your double-glazed windows, since they could replace the whole unit.